Concrete Resurfacing & Overlays in Calexico CA - a new face for tired concrete
Worn, stained or flaking concrete doesn't always need tearing out. We check the cracks, lay a new surface and cure it right away.
Request an estimate
Can I resurface worn concrete instead of tearing it out?
Concrete resurfacing and overlays in Calexico put a new surface layer over the concrete you already have, so a worn driveway, patio or floor gets a fresh face without breaking out a slab that's still sound underneath.
Most people call us when the top of the slab has worn, pitted or stained but the concrete under it is still solid, and they'd rather not pay to haul it away. The price moves with how much area we're covering, how many cracks need work and how much old coating or loose concrete we have to grind off before anything new goes on. The schedule turns on that same prep, on the weather the day we pour and on whether the work reaches city property and needs a permit, and I'll put your own numbers in a written estimate once I've seen the slab.
How we handle concrete resurfacing and overlays
I look at the cracks first, because an overlay gives tired concrete a new face but it won't hide a crack that keeps moving, and I'll tell you plainly how we'll deal with each one before you decide anything. Then our crew cleans the slab and grinds off old coatings and loose concrete so the new layer has something solid to grab, and we fill the cracks and pits we agreed to repair. We put the overlay down and start curing it right after it goes down, because how the new layer cures decides a lot about how well it holds up.
Some slabs need a different fix than a new face. If your floor is out of level or has low spots, self-leveling concrete and overlays can bring it back to flat before any finish goes on. Concrete around a pool sees water every day, so we handle that as its own job under pool deck coatings and resurfacing.
Concrete resurfacing and overlays in Calexico and city permits
When an overlay reaches the part of a driveway or sidewalk that sits on city property, you need an encroachment permit, the city's okay to work on its land, and the Public Works Engineering Division is the office that handles it. That permit usually comes with traffic control wherever the street or sidewalk is blocked, a site plan with the work schedule and third-party liability insurance, which the city sets at no less than $1,000,000. For work on your own lot, the city's Building Division issues building permits and checks work against code, and whether your overlay needs one isn't something I'll guess at from the street. If your job needs a permit, I'll tell you at the estimate and we'll handle the paperwork with the office that covers your address.
Most of the overlays we're asked about are driveways, patios and garage or shop floors where the concrete is sound but the top has worn out, and we get the same calls on jobs in El Centro and Heber. We're based in Calexico and work in the cities around it, so if yours isn't on our site, call and ask.
- Call (442) 250-4457
- Mon–Sun: 7 AM–10 PM
- Calexico, CA 92231
What happens when you call Calexico Precision Epoxy Flooring in Calexico?
Call or send a message
Call (442) 250-4457 or use the form and tell us what's going on with your concrete. We'll get back to you and set a time for me to come out.
I come out and check the slab
I look the floor over, check it for moisture and cracks, and talk through what you want from it. You get your options and a written estimate before any work starts, so you know where the money goes.
We prep, pour and walk it
Our crew preps the concrete and lays the overlay with me on site, and if the job falls under a city encroachment permit, we book the city's inspection 24 hours ahead as the city requires. When it's done, we walk the finished job with you.
Why Calexico homeowners call Calexico Precision Epoxy Flooring for overlays
I come out and stay on site
I'm the one who looks at your slab and writes the estimate, and I'm on site with our crew while the work gets done. That means the person who decided how to handle your cracks is the one watching them get handled.
Prep comes first, since 2023
I grew up fixing things on my family's farm, learned concrete prep and coatings on other crews, and started this business in Calexico in 2023. We're known for floors that stay bonded, and that comes from the time we put into the concrete underneath.
Licensed in California, fully insured
The state contractors board only lets someone work unlicensed on minor jobs up to $1,000 that need no permit and where they employ no one, and an overlay done by a crew is past that line. We're licensed and fully insured, so that question is settled before we start.
If you want a straight answer on what your slab can handle, send us a few details and I'll come take a look.
Request an estimateGet a written estimate for your concrete overlay
We reply within one business day to set up a free on-site estimate, and there's no obligation. I'll come out myself, look at the slab and its cracks, and go over your options and a written estimate with you.
- Licensed and fully insured.
- Phone
- (442) 250-4457
- Location
- Calexico, CA 92231
- Hours
- Mon–Sun: 7 AM–10 PM
Questions about concrete resurfacing in Calexico
Will a concrete overlay hide the cracks in my slab?
Not if the cracks are still moving. Polymer overlays, the kind made with a resin binder, aren't designed to resist reflective cracking, which is when a crack in the old slab shows back through the new layer. Before you choose an overlay, ask any crew how they'll handle your cracks, and that's the first thing I'll walk you through.
What time of day is best to resurface concrete in hot weather?
Early morning, whenever it can be arranged. Heat speeds up the reaction that hardens cement and dries fresh concrete faster, which can hurt how well it holds up, so a concrete trade group advises early placement and suggests temporary shade to cool the surface and windbreaks to slow the wind across it. With polymer overlays, how easily the material spreads and how fast it cures depend on the temperature of the slab, the material and the air, so plan on a crew that starts early in the day.
Who gets the city permit for concrete work by the sidewalk in Calexico?
We do, when your job needs one. Work on a driveway or sidewalk inside city property goes through the encroachment permit described above, and I'll tell you at the estimate whether your project reaches that far.
How much does concrete resurfacing cost in Calexico?
Concrete resurfacing across the US usually costs about $1,000 to $4,500 for a typical project, and that's a national range for the work, not our price. Your own figure turns on the area, the cracks and the prep mentioned earlier, and you'll get it in a written estimate after I've seen the slab.
How do I get my slab ready for a concrete overlay?
Keep it dry, because polymer overlays only go on dry surfaces. Ask your crew how the slab should be kept on the day of the work, and I'll go over that with you before we put you on the schedule.
What is the best way to cure a new concrete overlay?
Curing should start right after the new layer goes down. For fresh concrete, a concrete trade group lists a curing compound, continuous soaking, a wet burlap or plastic sheet cover, or curing paper. Ask your crew which method they'll use, and I'll tell you which one fits your job and why.
Other concrete work that may fit
Self-Leveling Concrete & Overlays
If your floor dips, slopes the wrong way or has low spots, a self-leveling layer brings it flat so the next finish has an even base.
Pool Deck Coatings & Resurfacing
Concrete around a pool takes wet bare feet, splashing and pool chemicals, so it gets its own coating or resurfacing plan rather than a standard overlay.
Send us photos of your slab
A few photos of the concrete, any cracks and whether the work reaches the sidewalk or street let me show up already knowing what to look for.
Request an estimateCall (442) 250-4457